Small Bearing Types







  Home > Angular Contact Small Bearings >

7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan
7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan
7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan
  
Our Price: $139.54
Inner Diameter: Item: 7000CYDUP4BNLS Angular Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearings
Width Diameter: Dimensions: 10mm x 26mm x 8mm/Metric
Type : Bearing Inner Diameter: 10mm
Standard : Bearing Outer Diameter: 26mm


Availability:: in stock
Product Code: 7000CYDUP4BNLS-NACHI-10X26X8
Qty:

Description
 

7000CYDUP4BNLS Nachi Angular Ball Bearings, 15 Contact Angle, Polyamide resin cage, Abec-5 Made in Japan, 7000CYDUP4BNLS inner diameter is 10mm, 7000CYDUP4BNLS outer diameter is 26mm, 7000CYDUP4BNLS width is 8mm.

  • Item: 7000CYDUP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearings
  • Dimensions: 10mm x 26mm x 8mm/Metric
  • Bearing Inner Diameter: 10mm
  • Bearing Outer Diameter: 26mm
  • Bearing Width: 8mm
  • Size: 10 x 26 x 8 mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-5
  • Basic Dynamic Load Cr (KN): 5.35
  • Made in Japan
  • Quantity: One Bearing
  • dDBrr1
  • 10mm26mm8mm0.30.15
  • Nachi Single Row Angular Contact Bearing
  • The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7000CYDUP4BNLS Nachi Angular Contact Bearing 10x26x8:Abec-5:Japan

    7000CYDUP4BNLS-Nachi-10x26x8

    		•

    Share your knowledge of this product. Be the first to write a review »