Small Bearing Types







  Home > Angular Contact Small Bearings >

7001CYDUP4BNLS Nachi Angular Contact Bearing 12x28x8:Abec-7:Japan
7001CYDUP4BNLS Nachi Angular Contact Bearing 12x28x8:Abec-7:Japan
7001CYDUP4BNLS Nachi Angular Contact Bearing 12x28x8:Abec-7:Japan
  
Our Price: $450.74
Inner Diameter: Item: 7001CYDUP4BNLS Angular Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Dimensions: 12mm x 28mm x 8mm/Metric
Type : Bearing Inner Diameter: 12mm
Standard : Bearing Outer Diameter: 28mm


Availability:: in stock
Product Code: 7001CYDUP4BNLS-NACHI-12X28X8
Qty:

Description
 

7001CYDUP4BNLS Nachi Angular Ball Bearing, 15 Contact Angle, Polyamide resin cage, ABEC-7 Made in Japan, here are the dimensions of the 7001CYDUP4BNLS, 7001CYDUP4BNLS inner diameter is 12mm, 7001CYDUP4BNLS outer diameter is 28mm, 7001CYDUP4BNLS width is 8mm.

  • Item: 7001CYDUP4BNLS Angular Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Dimensions: 12mm x 28mm x 8mm/Metric
  • Bearing Inner Diameter: 12mm
  • Bearing Outer Diameter: 28mm
  • Bearing Width: 8mm
  • Size: 12 x 28 x 8 mm
  • Cage: Polyamide resin cage
  • Quality: ABEC-7
  • Basic Dynamic Load Cr (KN): 5.80
  • Made in Japan
  • Quantity: One Bearing
  • dDBrr1
  • 12mm28mm8mm0.30.15
  • Nachi Single Row Angular Contact Bearing
  • The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7001CYDUP4BNLS Nachi Angular Contact Bearing 12x28x8:Abec-7:Japan

    7001CYDUP4BNLS-Nachi-12x28x8

    		•

    Share your knowledge of this product. Be the first to write a review »