Small Bearing Types







  Home > Angular Contact Small Bearings >

7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings
7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings
7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings
  
Our Price: $28.74
Inner Diameter: Item: 7201 Ball Bearing
Outer Diameter: Type: Nachi Angular Ball Bearing
Width Diameter: Cage: Steel Cage
Type : Dimensions: 12mm x 32mm x 10mm/Metric
Standard : ID (inner diameter)/Bore: 12mm


Availability:: in stock
Product Code: 7201-NACHI-12X32X10
Qty:

Description
 

7201 Nachi Angular Ball Bearing, bearing is 40 Contact Angle, bearing has Steel Cage, Made in Japan, inner diameter is 12mm, outer diameter is 32mm and width is 10mm.

  • Item: 7201 Ball Bearing
  • Type: Nachi Angular Ball Bearing
  • Cage: Steel Cage
  • Dimensions: 12mm x 32mm x 10mm/Metric
  • ID (inner diameter)/Bore: 12mm
  • OD (outer diameter): 32mm
  • Width/Height/thickness: 10mm
  • Size: 12 x 32 x 10 mm
  • Quantity: One Bearing
  • Dynamic load rating Cr: 7,600 N
  • Static load rating Cor: 3,960 N
  • Limiting Speed:
  • Grease Lubrication: 20,000 RPM
  • Oil Lubrication: 27,000 RPM
  • Made in Japan
  • Nachi Single Row Angular Contact Bearing
  • The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.

    7201 Nachi Angular Contact Bearing 12x32x10 C3 Japan Bearings

    7201-Nachi-12x32x10

    		•

    Share your knowledge of this product. Be the first to write a review »