Description
7000CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
Item: 7000CYDUP4 Angular Ball Bearing Type: Nachi Angular Ball Bearing Cage: Polyamide resin cage Quality: ABEC-7 (P4 quality) Dimensions: 10mm x 26mm x 8mm/Metric Bearing Inner Diameter: 10mm Bearing Outer Diameter: 26mm Width/Height/thickness; 8mm Size: 10 x 26 x 8 mm Quantity: One Bearing Made in Japan DimensionsdDBrr1a10mm26mm8mm0.3mm0.15mm-1.9mmNachi Single Row Angular Contact BearingThe raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.7000CYDUP4 Nachi Angular Contact Bearing 10x26x8 Abec-7 Japan Bearings
7000CYDUP4-Nachi-10x26x8-Abec
