Description
7001CYDUP4BNLS Nachi Angular Ball Bearing, 15 Contact Angle, Polyamide resin cage, ABEC-7 Made in Japan, here are the dimensions of the 7001CYDUP4BNLS, 7001CYDUP4BNLS inner diameter is 12mm, 7001CYDUP4BNLS outer diameter is 28mm, 7001CYDUP4BNLS width is 8mm.
Item: 7001CYDUP4BNLS Angular Ball Bearing Type: Nachi Angular Ball Bearing Dimensions: 12mm x 28mm x 8mm/Metric Bearing Inner Diameter: 12mm Bearing Outer Diameter: 28mm Bearing Width: 8mm Size: 12 x 28 x 8 mm Cage: Polyamide resin cage Quality: ABEC-7 Basic Dynamic Load Cr (KN): 5.80 Made in Japan Quantity: One Bearing dDBrr112mm28mm8mm0.30.15Nachi Single Row Angular Contact BearingThe raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.7001CYDUP4BNLS Nachi Angular Contact Bearing 12x28x8:Abec-7:Japan
7001CYDUP4BNLS-Nachi-12x28x8
