Description
7201CYDUP4 Nachi high precision Angular pair of Ball Bearings with 15 degrees contact angle and Polyamide resin cage, pair of ball bearings is 2 duplex bearings, bearings are ABEC-7 (P4) quality and made in Japan.
Item: 7201CYDUP4 Nachi Ball Bearing Type: Nachi Angular Ball Bearings Cage: Polyamide resin cage Quality: ABEC-7 (P4 quality) Dimensions: 12mm x 32mm x 10mm/Metric ID (inner diameter)/Bore: 12mm OD (outer diameter): 32mm Width/Height/thickness: 10mm Size: 12 x 32 x 10 mm Quantity: Pair of Bearings Dynamic load rating Cr: 13,000 N Static load rating Cor: 7,750 N Limiting Speed: Grease Lubrication: 29,000 RPM Oil Lubrication: 40,000 RPM Made in Japan Dimensionsd D B r r1 a 12mm 32mm 10mm 0.6mm 0.3mm -2.5mm Nachi Single Row Angular Contact BearingThe raceways of both the inner and outer rings of this bearing type are made with a set contact angle. These bearings are non-separable. Since the balls are inserted utilizing counter-bore construction, a larger number of balls can be installed than in the case of Deep-groove ball bearings. Standard cage materials may be pressed steel, high-strength brass, or synthetic resin. Cage material is dependent on the bearing series and or service condition. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load. When mounting two single bearings in adjacent positions, NACHI provides these combination parts (pairs) with preadjusted clearance. Paired combination bearings are matched sets. Combination or paired bearings can be arranged BACK-TO-BACK (DB), FACE-TOFACE (DF), or in TANDEM (DT). DB or DF sets can sustain bidirectional axial loads.7201CYDUP4 Nachi Angular Contact Bearing 12x32x10 Abec-7 Bearings
7201CYDUP4-Nachi-12x32x10-Abec
